FLOORING

JB Construction Management of New Jersey, with a generalized overview of how we might install new ceramic tile flooring:
 

1. Preparation:

   • Measure the area where the tile flooring will be installed and calculate the amount of tile needed, factoring in extra for cuts and waste.

   • Select the type, size, and pattern of tiles according to the client's preferences and the project requirements.

   • Gather all necessary tools and materials, including tiles, tile adhesive, grout, spacers, tile cutter or wet saw, trowel, level, and sponge.

   • Ensure that the subfloor is clean, level, dry, and structurally sound. Any necessary repairs should be completed before proceeding.

2. Layout and Planning:

   • Determine the starting point for laying the tiles, considering factors such as the room's dimensions and layout.

   • Use chalk lines or tile layout grids to plan the placement of the tiles, ensuring they are aligned properly and laid out in a visually pleasing manner.

   •  

3. Applying Adhesive:

   • Mix the tile adhesive according to the manufacturer's instructions until it reaches a smooth consistency.

   • Use a notched trowel to spread the adhesive onto the subfloor, working in small sections at a time.

   • Create ridges in the adhesive with the notched side of the trowel to ensure proper adhesion of the tiles.

4. Laying Tiles:

   • Begin laying tiles at the predetermined starting point, pressing them firmly into the adhesive.

   • Use tile spacers to maintain consistent spacing between tiles and ensure uniform grout lines.

   • Continue laying tiles in rows, working outward and across the floor, and periodically checking for levelness.

   • Use a tile cutter or wet saw to make any necessary cuts to fit tiles around obstacles or along edges.

5. Grouting:

   • Allow the tile adhesive to set for the time specified by the manufacturer before grouting.

   • Mix the grout according to the manufacturer's instructions until it reaches a smooth consistency.

   • Use a grout float to apply grout to the tile joints, working it into the gaps between tiles at a 45-degree angle.

   • Remove excess grout from the tile surface with a damp sponge, rinsing frequently to prevent grout haze.

6. Cleaning and Sealing:

   • After the grout has cured for the recommended time, clean the tiles and grout lines with a grout haze remover if necessary.

   • Apply a penetrating grout sealer to protect the grout from stains and moisture, following the manufacturer's instructions.

7. Final Touches:

   • Remove any remaining tile spacers and clean the tiles thoroughly to remove any adhesive residue or grout haze.

   • Inspect the finished tile floor for any imperfections or areas that may require touch-ups.

 

Throughout the installation process, JB Construction Management would ensure attention to detail, proper technique, and adherence to industry standards to achieve a high-quality result. Always consult with them for specific guidance tailored to your project.